Technical library

Reference tools

All articles by subject

Investment Casting

• Investment castingWhat investment casting is, how the lost-wax process works, where it came from and when it is the right manufacturing route for a metal component.
• Investment casting, lost-wax casting, precision casting: terminologyHow the terms investment casting, lost-wax casting, precision casting and ceramic shell casting relate, where they overlap and where their use differs.
• Advantages and limitations of investment castingA balanced engineering view of what investment casting does well, where its limits lie and which part characteristics make it the economic choice.

Manufacturing Process

• The investment casting manufacturing processThe complete investment casting process in 30 stages, from drawing review and wax tooling through shell building, melting and pouring to finishing, inspection and dispatch.
• Wax patterns, injection parameters and toolingPattern waxes, wax injection parameters, die design, soluble and ceramic cores, and how pattern quality determines casting accuracy.
• Gating, feeding and solidificationHow gating systems are designed for investment castings: filling without turbulence, directional solidification, feeding of shrinkage and the influence of cooling rate.
• Ceramic shell: materials, slurry, stucco and dryingCeramic shell materials and construction for investment casting: binders, refractory flours, slurry control, stucco, drying, shell strength and permeability.
• Dewaxing, shell firing and preheatingDewaxing technologies for investment casting shells, why rapid heating prevents shell cracking, and how firing and preheat temperature influence casting quality.
• Melting technologies, pouring and solidificationInduction melting in air and vacuum, charge materials, melt treatment, pouring temperature and pouring methods for steel, stainless and nickel-alloy investment castings.
• Knockout, cut-off, heat treatment and finishingPost-casting operations for investment castings: shell removal, cut-off, grinding, heat treatment, blasting, surface finishing, straightening and machining.
• Investment casting process variantsVariants of investment casting: air-melt and vacuum casting, counter-gravity and centrifugal filling, solid mould casting, directional solidification and printed patterns.

Materials & Alloys

• Materials and alloys for investment castingSearchable reference database of investment casting alloys: carbon and low-alloy steels, stainless and duplex steels, heat-resistant steels, nickel, cobalt, aluminium, copper and titanium alloys.
• International material equivalents for cast alloysHow to compare cast alloy designations across EN, DIN, ASTM, ASME, UNS, AISI, SAE, JIS, ISO and GB/T, and why similar grades are not automatically interchangeable.
• Carbon and low-alloy steelsStructural, pressure-retaining and heat-treatable steel grades for general engineering castings.
• Austenitic stainless steelsCast counterparts of the 304 and 316 families and higher-alloyed austenitic grades for corrosive service.
• Martensitic and precipitation-hardening stainless steelsHigh-strength stainless grades whose properties are set by hardening and tempering or by ageing.
• Duplex and super duplex stainless steelsAustenitic-ferritic grades with high strength and resistance to chloride pitting and stress corrosion.
• Heat-resistant steelsHigh-carbon iron-chromium-nickel casting alloys for furnace parts and service above about 650 °C.
• Nickel-based alloysCorrosion-resistant Ni-Cr-Mo and Ni-Cu alloys and high-temperature nickel alloys.
• Cobalt-based alloysCobalt-chromium alloys for wear, galling and high-temperature resistance.
• Aluminium alloysHeat-treatable Al-Si-Mg casting alloys for lightweight, thin-walled precision castings.
• Copper-based alloysSilicon bronze, aluminium bronze, nickel-aluminium bronze and red brass casting alloys.
• Titanium alloysUnalloyed titanium and Ti-6Al-4V castings for high specific strength and corrosion resistance.

Design & Engineering

• Design and engineering for investment castingEngineering guidance for investment cast components: design rules, dimensional and geometrical tolerances, surface finish and comparison with other manufacturing processes.
• Design guidelines for investment castingsPractical design-for-manufacture rules for investment castings: wall thickness, transitions, fillets, holes, cores, undercuts, ribs, bosses, draft, machining allowance and part consolidation.
• Dimensional and geometrical tolerances for investment castingsTolerancing of investment castings: ISO 8062-3 casting tolerance grades, VDG P 690, geometrical tolerances to ISO 1101, datum systems, machining allowance, shrinkage and distortion.
• Surface finish of investment castingsSurface texture of investment castings: Ra and Rz, typical as-cast, blasted, ground and machined conditions, how to specify surface requirements and visual acceptance standards.
• Investment casting compared with other manufacturing processesQualitative comparison of investment casting with sand, shell mould, die, centrifugal and lost foam casting, forging, CNC machining, MIM, sheet metal, welding and additive manufacturing.

Quality & Inspection

• Quality assurance, inspection and testingQuality assurance for investment castings: inspection planning, visual and dimensional inspection, non-destructive testing, material verification, documentation and casting defect prevention.
• Dimensional inspection of investment castingsDimensional inspection methods for castings: hand gauges, CMM, optical 3D scanning, form measurement, datum alignment, first article inspection and series control.
• Non-destructive testing of investment castingsNDT methods for investment castings: liquid penetrant, magnetic particle, radiographic and ultrasonic testing, computed tomography, leak testing, personnel qualification and acceptance levels.
• Material testing and metallurgical verificationVerification of cast alloys: spectrometric chemical analysis, PMI, tensile, hardness and impact testing, metallography, ferrite measurement, corrosion tests and heat-treatment verification.
• Inspection documents, certificates and traceabilityDocumentation for investment castings: EN 10204 inspection documents 2.1, 2.2, 3.1 and 3.2, material certificates, dimensional and NDT reports, heat-treatment records and traceability.
• Casting defects and troubleshootingReference library of investment casting defects: appearance, possible causes, process stages of origin, detection methods and preventive and corrective measures.

Applications

• Industries and applications of investment castingWhere investment castings are used: typical components, materials and engineering considerations in aerospace, automotive, energy, pumps and valves, marine, medical, machinery and other industries.